davidstalmarck

Clawd Bot — Development skill for Claude Code

Development community

Desk robot that shows what Claude Code is doing on two screen eyes, and lets you talk to it.

How to install Clawd Bot

This entry records only its repository, not the path inside it, so there is no exact command to give. Open davidstalmarck/clawd-bot and copy the folder into ~/.claude/skills/, or the file into ~/.claude/agents/.

What Clawd Bot does

Desk robot that shows what Claude Code is doing on two screen eyes, and lets you talk to it. Built on an Atech 14-port board.

Alternatives in Development

Contributing To Clawd Code — Thank you for your interest in contributing to Clawd Code 231 ★
Clawdmeter Plus — A round AMOLED desk display for your live Claude Code usage, weather, background-agent health, and a daily voi 87 ★
Notch Pilot — A live companion for Claude Code that lives in your MacBook notch 67 ★

README

Clawd bot

A desk robot that shows what [Claude Code](https://claude.com/claude-code) is doing, and that you can talk to.

Eyes: two small screens, mounted portrait. They animate a mood for each Claude Code event: thinking, running a tool (with the tool name and command as captions), waiting for your permission, or done.
Voice: hold the button and speak. Your words become a prompt in a Claude Code session, and the reply is spoken back through the speaker.
Status light: a 3×3 LED grid.
Knob: turn for volume; press to cancel.

Open `docs/index.html` for a live preview of every mood. That page is also the project website (see below).

Hardware

Built on an [Atech](https://atech.dev) 14-port board (ESP32-S3), using all 12 slots:

Module	Instance	Ports
ST7735 screen ×2	`eye_l`, `eye_r`	1+2, 5+6
I2S microphone	`mic`	3+4
Rotary encoder	`knob`	9+10
I2S speaker	`spk`	13+14
Button	`btn`	7
NeoPixel 3×3	`led`	11

Case: `case/Clawd_Case_v2.stl`. Print it as one piece, as it comes, with no rotation. See `case/PRINT_ME.md` and `case/CAD_NOTES.md`. The FreeCAD source is `case/ClaudeDeskCompanion.FCStd`.

Clawd body (new case)

A newer body shell, printed and in use. Print each file as it comes, flat on the bed. All sizes are in millimetres. Print settings and build steps: [`case/CLAWD_BODY.md`](case/CLAWD_BODY.md).

File	Part	Size
`case/clawd_body.stl`	Body shell (open side up)	160 × 120 × 70.5
`case/clawd_cover_knob.stl`	Trim plate around the knob	44.6 × 44.6 × 2
`case/clawd_cover_button.stl`	Trim plate around the button	24.6 × 24.6 × 2