hamzaabduljabbar

AutoConst Spec Drawings Crosscheck Claude — Testing skill for Claude Code

Testing community

Automatically catch coordination mismatches between a construction spec book and its structural drawings.

How to install AutoConst Spec Drawings Crosscheck Claude

This entry records only its repository, not the path inside it, so there is no exact command to give. Open hamzaabduljabbar/autoConst-spec-drawings-crosscheck-claude and copy the folder into ~/.claude/skills/, or the file into ~/.claude/agents/.

What AutoConst Spec Drawings Crosscheck Claude does

Automatically catch coordination mismatches between a construction spec book and its structural drawings. Cross-checks concrete strength, rebar spec, masonry grade, and external standards (ASTM/ACI/CSA). Handles imperial + metric.

Alternatives in Testing

  • #29 — #52, #103) 92.5k ★
  • Claude Codepro — by Max Ritter - Professional development environment for Claude Code with spec-driven workflow, TDD enforcemen 1.6k ★
  • Adversarial Spec — A Claude Code plugin that iteratively refines product specifications by debating between multiple LLMs until a 514 ★

README

Spec vs Drawings Cross-Check

**Automatically catch coordination mismatches between a project's specification book and its structural drawings — before they become change orders.**

Point it at a spec PDF and a drawing set. Two minutes later you have a page-anchored report telling you exactly where the two documents disagree on concrete strength, rebar spec, masonry grade, and external standards (ASTM, ACI, AWS, CSA...).

Same idea as the [Drawing Takeoff](https://github.com/hamzaabduljabbar/autoConst-drawing-takeoff-claude) and [Spec Index](https://github.com/hamzaabduljabbar/autoConst-spec-index-claude) tools — index each document once, then run the join to find the gaps.

Works on **US CSI MasterFormat** specs and **Canadian municipal** specs. Handles imperial (psi, Grade 60, ASTM A615) and metric (MPa, Grade 400W, CSA G30.18) — and cross-unit projects (metric drawing bid against an imperial spec, or vice versa).


What this looks like in practice

Real output from a US project (California DGS — San Gorgonio Pass):

■ Reinforcing bar standard (main)
   spec (p32):     ASTM A615
   drawings (p5):  ASTM A615
   VERDICT: ✅ MATCH

■ Reinforcing bar grade
   spec (p32):     Grade 60
   drawings (p5):  Grade 60
   VERDICT: ✅ MATCH

■ Concrete compressive strength f'c (psi)
   spec:     4351 psi
   drawings: 2500, 3000, 4000 psi
   VERDICT: ⚠ VERIFY — spec requires min 4351 psi (§32 13 15);
            drawing shows 2500 psi for some elements. Confirm those
            elements aren't governed by §32 13 15.

■ External standards referenced by the drawings — is each in the spec?
   ✅ ASTM A615      → also in spec
   ✅ ACI 318        → also in spec  (matched despite "ACI 318-14" vs "ACI 318")
   ⚠  ASTM A307     → NOT found in spec  ← real coordination gap
   ⚠  ASTM A53      → NOT found in spec  ← real coordination gap

Every row is page-anchored on both sides. You can verify each finding against the source PDF in seconds.


Setting it up (step by